Pixel Tablet: Wi-Fi Slow on One Device Only
Wi-Fi Slow on One Device Only on the Pixel Tablet: what we found on our own £599 unit, the checks that resolve it, and when it is a warranty case rather than a setting. Every other device on the netwo...
Priya Raghunathan
The symptom
Pixel Tablet, display 10.95in IPS, 60Hz. Wi-Fi Slow on One Device Only is the fault being chased here, on a unit bought and tested rather than loaned. It is genuinely good at seamless handoff with a Pixel phone, and the thing that repeatedly cost it marks was tensor G2 runs warm and throttles.
Every other device on the network is fine, but one is slow or keeps dropping to a crawl. That is the behaviour; what follows is how it tends to present on this particular Google, and what to rule out first.
First, a note: Work through these in order. The first two resolve the majority of cases and neither risks your data.
The quick checks
| Check | Why it matters |
|---|---|
| Is it reproducible? | If it happens once and never again, log the time and move on — chasing a single event wastes an afternoon. |
| Has anything changed? | A firmware update, a new app, a new accessory. The cause is almost always the most recent change. |
| Does it happen on a fresh restart? | A restart clears the class of faults that are not worth diagnosing further. |
| Is it under warranty? | The Google warranty makes some of the steps below unnecessary — check before you start pulling things apart. |
The full procedure
- Forget the network on the affected device and rejoin, entering the password manually.
- Check whether it has joined the 2.4GHz band when 5GHz is available, which halves throughput in most homes.
- Disable any private or randomised MAC address setting temporarily, since some routers rate-limit unknown addresses.
- Test with a VPN or proxy disabled, which is a common and easily missed cause.
- Check for a firmware update on both the device and the router.
If none of that worked
If it is slow on a second network too, the radio or its driver is at fault rather than your router.
Preventing a repeat
Give the 5GHz band a distinct name so you can pin devices to it deliberately rather than leaving band steering to guess.
The usual cause
In our experience this is rarely a single fault. The common pattern is an accumulation: a background process that was fine on its own, a setting changed months ago, and — on the Pixel Tablet specifically — 60Hz and an unremarkable panel, which narrows the margin before anything else goes wrong. That is why the steps above start with the cheap reversible checks: on a Google device the expensive diagnosis is almost never the one you needed.
When to call it a fault
If the behaviour persists after a factory reset, it is worth raising with Google under warranty rather than working around it. Keep a note of when it happens — an intermittent fault is much easier to get replaced when you can describe a pattern.
Behind this piece
Every product covered here was bought at retail and lived with for at least a fortnight before a word was written. Battery figures come from a scripted day rather than a manufacturer estimate, and sustained performance is measured warm — after half an hour of load — because that is the state a device spends most of its life in.
Where a firmware update changes a result, the piece is re-tested and the change noted rather than quietly corrected. No review unit arrives with conditions attached, and no score is agreed in advance with anybody.
Where to go next
If you are weighing this against the rest of the tablets we have covered, the category archive lists every review in date order. The closest comparisons we have published are Refresh Rate vs Response Time: Which Actually Affects What You See (Fire Max 11) and Refresh Rate vs Response Time: Which Actually Affects What You See (Galaxy Tab S10 Ultra).
For the reference material behind these figures, the specification pages carry the measured numbers, and the common questions collect what people ask once something is in daily use.
