Skip to content
Cameras

Why Software Update Policies Should Change What You Buy (Insta360 X4)

Why Software Update Policies Should Change What You Buy explained, with the Insta360 X4's own measured figures as the worked example: a device with seven years of updates is usable far longer than one...

Aisha Bello 4 min read 162 views
Why Software Update Policies Should Change What You Buy (Insta360 X4)

In brief

Insta360 X4, video 8K 360, 4K single-lens — Why Software Update Policies Should Change What You Buy. Measured on hardware rather than argued from theory, on a device we rate for a removable lens guard.

A device with seven years of updates is usable far longer than one with two, and that gap now outweighs most hardware differences at the same price.

Why this matters: Security patches, not features, are what determine how long a device stays safe to use.

How it actually works

Manufacturers commit to a number of years of OS upgrades and, separately, security patches. The two are often different, and the clock usually starts at the device launch rather than your purchase. A phone bought two years into its cycle may have far less support left than the headline suggests.

What it looks like in practice

Take the Insta360 X4 as a worked example. Shoot first and choose the framing later is a genuinely different way to work. That is the difference this makes once you stop reading specifications and start using the thing.

SpecificationInsta360 X4
Video8K 360, 4K single-lens
StabilisationFlowState
Battery135 minutes
RatingWaterproof to 10m
Weight203g

The spread across devices

One worked example is an anecdote. Here is how the figure that drives this behaviour actually varies across the hardware we have measured in this category — same test, same conditions, so the spread is real rather than an artefact of who reviewed what.

ModelVideoPriceOur score
Insta360 X48K 360, 4K single-lens£4794 / 5
Nikon Z6 III6K/60 RAW internal£21994 / 5
Sony ZV-E10 II4K/60 10-bit£9994 / 5
Fujifilm X100VI—£15995 / 5

What good actually looks like

It helps to have a number in mind before you start comparing. Across the cameras we have measured, the useful thresholds are the ones where a difference stops being visible: below them you notice, above them you are paying for a specification rather than an experience. The Insta360 X4 reports 8K 360, 4K single-lens for video, which sits comfortably on the right side of that line, and FlowState for stabilisation. Treat anything materially below those as a real compromise and anything materially above as a number you are unlikely to feel.

How to check this on your own device

  1. Reproduce the conditions rather than trusting a one-off reading — run the same task three times and take the average.
  2. Note the figure your device reports and the figure it actually achieves; on the Insta360 X4 those diverge under sustained load.
  3. Change one variable at a time. Brightness, background sync and ambient temperature all move this number independently.
  4. Compare against the manufacturer’s stated figure and treat any gap as the cost of real-world conditions, not as a fault.
  5. Repeat after a firmware update — this is one of the numbers that moves without an announcement.

Where it shows up on a spec sheet

On a camera listing this usually appears as the video line — the Insta360 X4 quotes 8K 360, 4K single-lens. That figure is necessary but not sufficient: the stabilisation entry (FlowState) constrains it in practice, and the two are almost never presented together. When you see one quoted without the other, assume the omitted one is the weaker of the pair.

Putting it to work

Divide the price by the years of remaining support before comparing two devices. The cheaper one is often more expensive per year.

Support length is a price, not a feature.

Behind this piece

How we tested this — Why Software Update Policies Should Change What You Buy (Ins...
How Tech Daily Review tests the hardware it writes about.

Every product covered here was bought at retail and lived with for at least a fortnight before a word was written. Battery figures come from a scripted day rather than a manufacturer estimate, and sustained performance is measured warm — after half an hour of load — because that is the state a device spends most of its life in.

Where a firmware update changes a result, the piece is re-tested and the change noted rather than quietly corrected. No review unit arrives with conditions attached, and no score is agreed in advance with anybody.

Where to go next

If you are weighing this against the rest of the cameras we have covered, the category archive lists every review in date order. The closest comparisons we have published are Why Software Update Policies Should Change What You Buy (Nikon Z6 III) and Why Software Update Policies Should Change What You Buy (Sony A7 V).

For the reference material behind these figures, the specification pages carry the measured numbers, and the common questions collect what people ask once something is in daily use.

Frequently asked questions

Five years is now a reasonable minimum, and the best manufacturers offer seven from launch.
Broadly, though the effect is most visible on cameras like the Insta360 X4.
Run the same task three times and average the result. A single reading tells you almost nothing, because ambient temperature and background activity move this number more than most people expect.
Frequently, and rarely with an announcement. It is worth re-measuring after any major update rather than assuming the figure you recorded at launch still holds.
Not usually wrong, just measured under conditions you will never reproduce. Treat the gap as the cost of real-world use rather than as a defect.

Aisha Bello

Smart home and everything that talks to it. Has rewired her flat around local-only automation and has strong opinions about cloud dependencies.

Please login to comment.

Comments (0)

No comments yet.

Keep reading